We are searching data for your request:
Upon completion, a link will appear to access the found materials.
Nothing is lost, everything is transformed . So using an old washing machine drum we create a coffee table for the living room. The idea is to illuminate it from the inside by integrating a light fixture. The small holes reveal the lighting where a soft light emerges through the openings. And practical, the small doors of the drum! You can close them or leave them open. So you can hide the remote controls inside or on the contrary decorate the interior by placing your favorite books or magazines so that they are always close at hand. Level: way Completion time : 1 hour Indicative cost: 47.95 euros Necessary material : 1 Medium board of 60 cm = 20 euros 1 Wooden salad bowl = 15 euros 1 Spot = 12.95 euros Step 1: Interpret the table - Remove the spider from the drum. - Drill three holes. - Place the crosspiece in the center of the medium board. - Mark the future location of the screws. - Drill pre-holes on the board. - Paint the board in gray. - Leave to dry for two hours. - Paint the tray gray - Then turn the board over and paint the back. - Leave to dry for two hours. - Screw the crosspiece onto the board. Step 2: Compose the table - Glue a spot inside the drum with double-sided tape. - Place the drum on the pan. - Screw the board onto the drum using the crosspiece. Decorative tip: For this step, use a washing machine drum which opens at the top. Decorative creation: Véronique Rambaldi Thanks to Tollens Decorative tips and ideas for your coffee tables: the latest trends on coffee tables, How to choose your coffee table?